Differences

This shows you the differences between two versions of the page.

--- start [2023/12/10 09:07] – external edit (Unknown date) 127.0.0.1
+++ start [2025/02/09 10:08] (current) – mralvin
@@ Line 2: / Line 2: @@
 Questions, comments etc. about these projects, can happen at [[https://3iii.dk/blog/2023/05/hiatus/|my blog space]]
-**Projects Under Way:** (the June PCB production is done - and testing of the PCBs is happening)
+**Projects Under Way:** (the 2023 June PCB production is done - testing has been delayed - noted 2025 Feb)
   * [[cnc-grbl-uno-ver1|CNC-GRBL-UNO]] - a shield with [[https://www.aliexpress.com/w/wholesale-screw-terminals-3.5mm.html|screw terminals]], to be used with [[https://github.com/gnea/grbl|GRBL firmware]], and an [[https://store.arduino.cc/products/arduino-uno-rev3|Arduino UNO]]
       * (ver.1 is in use - ver.2 ready and done)
-  * [[cnc-XYZ-keyboard|CNC-XYZ-keyboard]] - XYZ buttons for movements 0.1 - 1 - 10 - 100 mm, i each direction
+  * [[cnc-xyz-keyboard|CNC-XYZ-keyboard]] - XYZ buttons for movements 0.1 - 1 - 10 - 100 mm, i each direction
         * (ver.1 is being tested - ver.2 ready and done)
+  * [[cnc-plc-opto8|CNC-PLC-Opto8]] - Optocoupler board/module with 2x 4-channel of input Opto-couplers
+        * (ver.2 ready for PCB production)
   * [[arduino-breadboard-modules|Breadboard Modules]] - several modules for use with Arduino and Breadboards