Start - All Modules - MOSFET modules

A single-channel dual-MOSFET module with Gate Driver circuitry.

• The Gate Driver circuitry transforms a 3V microprocessor signal, to become a 6-19V gate voltage on the driving mosfets. Mosfets open fully with a 10-16 volt signal on the mosfet gate-pin. A fully open mosfet has a lower internal ON-resistance, and thus it can control higher amps, without getting hot.

• And thus the Gate Driver circuitry on this module helps to keep the driver MOSFETs cool, when dealing with high ampere loads.

• Solder-jumpers are used to optimize the gate voltage of the driving mosfets