Welcome to the Projects page

Questions, comments etc. about these projects, can happen at my blog space

Projects Under Way: (the June PCB production is done - and testing of the PCBs is happening)

• CNC-GRBL-UNO - a shield with screw terminals, to be used with GRBL firmware, and an Arduino UNO
  • (ver.1 is in use - ver.2 ready and done)

• CNC-XYZ-keyboard - XYZ buttons for movements 0.1 - 1 - 10 - 100 mm, i each direction
  • (ver.1 is being tested - ver.2 ready and done)

• CNC-PLC-Opto8 - Optocoupler board/module with 2x 4-channel of input Opto-couplers
  • (ver.2 ready for PCB production)

• Breadboard Modules - several modules for use with Arduino and Breadboards
  • (ToDo: upload PCB pictures of each ver.1)

• Blinky Shield UNO - A Shield with 24 LEDs a LED for every pin of the Arduino UNO - or Metro M4
  • (ver.4 - rev.C1 and rev.D1 ready and done)

• Lab Power supply 5x - 5x fixed voltages (3V3, 5V, 7V5, 12V, 24V) - model 5D
  • (ToDo: upload ver.3 PCB pictures, and pictures of previous (used for years) iterations)

• Wemos D1-Mini - ESP8266 - PCBs & Projects
  • (ver.1 ready and done)

• Power 30-40 Amp Plus-Side E-relay
  • (ver.1 ready and done)

Completed Projects:

• ToDo

Trademarks:

* Arduino® is a trademark of Arduino SA

Other:

• SVseeker issue comment