arduino-breadboard-module-mosfet1f
Start - All Modules - MOSFET modules
A single-channel dual-MOSFET module with Gate Driver circuitry.
- The Gate Driver circuitry transforms a 3V microprocessor signal, to become a 6-19V gate voltage on the driving mosfets. Mosfets open fully with a 10-16 volt signal on the mosfet gate-pin. A fully open mosfet has a lower internal ON-resistance, and thus it can control higher amps, without getting hot.
- And thus the Gate Driver circuitry on this module helps to keep the driver MOSFETs cool, when dealing with high ampere loads.
- Solder-jumpers are used to optimize the gate voltage of the driving mosfets
arduino-breadboard-module-mosfet1f.txt · Last modified: 2025/02/16 12:01 by mralvin